Medline Basic Bed

Light beds are easy to transport with a foot section that weighs just 42 lbs (19 kgs). Convenient DC motor box snaps off quickly, making delivery, setup and routine maintenance easier. A 9V battery back up allows movement to lowest bed position during power failures (batteries not included). Headspring supports recessed to resist pinching and injuries. Foot assembly recessed to reduce chance of pinching.

Demonstration Videos

For privacy reasons YouTube needs your permission to be loaded.
I Accept
For privacy reasons YouTube needs your permission to be loaded.
I Accept
How to setup home Medline basic bed
ChatGPT

Setting up a Medline basic homecare bed involves several steps to ensure it is assembled correctly and safely for use. Here’s a step-by-step guide to help you through the process:

Supplies Needed:

  • Medline basic bed components (headboard, footboard, side rails, bed frame, motor, hand crank, mattress)
  • Allen wrenches or hex keys (usually provided with the bed)
  • Phillips screwdriver
  • Flathead screwdriver
  • Power drill (optional, for faster assembly)
  • Instruction manual (specific to your Medline bed model)

Steps for Setup:

  1. Unpack the Components:
    • Carefully unpack all the components from the packaging.
    • Ensure you have all parts listed in the instruction manual.
  2. Assemble the Bed Frame:
    • Lay out the main bed frame on the floor.
    • Attach the headboard and footboard to the bed frame using the provided bolts and screws. Tighten them securely using the appropriate tools.
  3. Install the Motor:
    • Attach the motor to the designated area on the bed frame, following the instructions in the manual. This may involve connecting motor brackets to the frame.
    • Ensure all motor connections are secure and the power cord is accessible.
  4. Attach the Side Rails:
    • Position the side rails on both sides of the bed frame.
    • Secure the rails using the provided screws and brackets. Make sure they are firmly attached and can move up and down smoothly.
  5. Install the Mattress Support:
    • Place the mattress support platform onto the bed frame.
    • Secure it using the provided screws or clamps.
  6. Position the Mattress:
    • Place the mattress on top of the mattress support platform.
    • Ensure it fits snugly and securely within the bed frame.
  7. Connect the Hand Crank (if applicable):
    • Attach the hand crank to the appropriate location on the bed frame.
    • Ensure it can move freely and operate the bed’s adjustment mechanisms.
  8. Test the Bed Functions:
    • Plug in the motor and test all bed functions, including raising and lowering the head and foot sections and adjusting the bed height.
    • If the bed is manually operated, use the hand crank to ensure all mechanical adjustments work smoothly.
  9. Final Adjustments:
    • Double-check all screws and connections to ensure they are tight and secure.
    • Make any necessary adjustments to ensure the bed is level and stable.
  10. Safety Check:
    • Ensure the side rails are securely attached and functioning correctly.
    • Confirm that there are no loose parts or potential hazards around the bed area.

Additional Tips:

  • Follow the Manual: Always refer to the specific instruction manual provided with your Medline bed model for detailed assembly instructions.
  • Assistance: It may be helpful to have another person assist with the assembly, especially when handling larger components like the bed frame and mattress.
  • Safety: Ensure all electrical components are properly connected and the bed is stable before use.
  • Regular Maintenance: Periodically check all bolts, screws, and connections to ensure they remain tight and secure over time.

By following these steps, you can set up your Medline basic homecare bed safely and correctly, ensuring a comfortable and secure sleeping environment.

Guidelines, Specifications & User Manuals

Brochure

Owners Manual

Specifications

Helpful Information

Basic Homecare Hospital Beds
Basic Semi-Electric Hospital Bed with 15″-20″ Height Range

Headspring supports recessed to resist pinching and injuries; foot assembly recessed to reduce chance of pinching
Light weight and 4 smooth-rolling casters (2 locking, 2 nonlocking) for easy transport
DC motor box snaps off quickly for easy delivery, setup, and routine maintenance
9V battery backup for moving to the lowest position during power failures (batteries not included)
Advanced remote with large buttons for easy patient use

Packaging
1 Case / Each
Manufacturer
Medline
Manufacturer #
MDR107002E

SKU
MDR107002E
Check Substitutes

For your business

To view pricing and availability

Login
Specifications
BARIATRIC
No
BED STYLE
Semi Electric
DECK STYLE
Split Spring
INCLUDES STAFF CONTROL OPENING
No
LATEX FREE
Yes
LENGTH INCHES
80 ”
MAX HEIGHT INCHES
20″
MAX LENGTH INCHES
80″
MAX WIDTH INCHES
36″
MIN HEIGHT INCHES
15″
MIN LENGTH INCHES
80″
MIN WIDTH INCHES
36″
PRODUCT USE
Homecare
UNSPSC
42191807
WEIGHT CAPACITY POUNDS
450 lb

Unit of Measure
Conversion
Net/Gross Weight (lbs)
Volume (cubic ft)
Shipping Dimensions (inch) L x W x H
GTIN
Case (CS)
1.0 Each
0.0 / 155.0
22.222
48.0 x 40.0 x 20.0
40080196320999
Each (EA)
1.0 Each
0.0 / 155.0
22.222
48.0 x 40.0 x 20.0
40080196320999

California Customers Only… WARNING

HCPCS Information
HCPCS Code: E0295

HCPCS Disclaimer: HCPCS codes and Home Health Consolidated Billing codes provided by Medline are intended as general guidelines only. Medline does not guarantee coverage or reimbursement of any products. You must address all coverage and reimbursement issues (including the correctness and accuracy of codes) with your individual payers. It is your responsibility to ensure the accuracy and appropriateness of each claim you submit, in accordance with all applicable payer requirements.

Related Devices