AirStart™ 10 CPAP with HumidAir™ Instructions

The AirStart™ 10 CPAP is a basic, easy to use CPAP machine for those looking to add a second machine to a travel residence, or for those who prefer a machine with simplicity. The AirStart™ 10 includes comfort features such as built-in humidification and exhalation relief.

Videos

Demonstration Videos

For privacy reasons YouTube needs your permission to be loaded.

User Manuals & Other Information

Manual

Clinical Guide

This Product Includes…

CPAP Machine
Built-In HumidAire Heated Humidifier
Standard Humidifier Chamber
SlimLine Tubing – 15mm Diameter
Power Supply and Cord
Travel Bag
1- Standard Filter (Installed)
Filter Cover
SD Card – Inserted in Machine
Patient Manual

Product Specifications

Weight – Machine with Water Chamber: 2.75 lbs (44 oz.)

Dimensions – Machine with Water Chamber: 10.04 in L x 4.57 in W x 5.91 in H

Weight – Standard Chamber: .54 lb

Weight – Machine with Side Cover (Without Water Chamber): Approx. 2.452 lbs

Dimensions – Machine with Side Cover (Without Water Chamber): Approx. 8 in L x 4.57 in W x 5.91 in H

Dimensions – Travel Bag: 13.24 in L x 10 in W x 5 in H

Weight – Travel Bag Alone: 1.18 lb

Weight – Machine with Humidifier; Power Supply and Cord; SlimLine Tube; Travel Bag:Approximately 5.1 lbs

Weight – Machine with Humidifier; Power Supply and Cord; OPTIONAL ClimateLineAir Tube; Travel Bag: Approximately 5.25 lbs

Sound Level: 26.6 dBA

Water Chamber Capacity: 380 mL

Weight – 90W Power Supply, Cord and Plug: 1.29 lb

Dimensions – 90W Power Supply Only (Not including Cor or Plug): 5 1/2 in x 1 7/8 in x 1 1/4 in

AC Input Range – 90W Power Supply: 100 – 240V, 50 – 60Hz, 1.0 – 1.5A, Class II

DC Output – 90 W Power Supply: 24V — 3.75A

Typical Power Consumption: 53W (57VA)

Peak Power Consumption: 104W (108VA)

Operating Pressure: 4 – 20 cm H2O (0.2 cm increments)

Length – SlimLine Tubing: 6 feet

Materials – SlimLine Tubing: Flexible Plastic

Materials – Standard Water Chamber: Injection Molded Plastic, Aluminum , Silicone Seal

Materials – Dishwasher Safe Water Chamber: Injection Molded Plastic, Stainless Steel, Silicone Seal

Materials – Standard Filter: Polyester non-woven fiber

Temperature Range – Optional ClimateLineAir™ Heated Tube: 60 – 80° F (16 – 30° C)

Operating Temperature: 41° F – 95° F (5° C – 35° C)

Storage and Transport Temperature: -4° F – 140° F (-20° C – 60° C)

Operating Humidity: 10% – 95% Relative Humidity, non-condensing

Storage and Transport Humidity: 5% – 95% relative Humidity, non-condensing

Operating Altitude: Sea Level – 8500 Feet (2,591 M); Air pressure range 1013 hPa – 738 hPa

Maximum Temperature – Heating Plate: 154° F (68° C)

Maximum Temperature – Cut Out: 165° F (74° C)

Maximum Gas Temperature: Less than or Equal to 106° F (? 41° C)

IEC 60601-1:2005 Classification: Class II (Double Insulation), Type BF, Ingress protection IP22

Machine Warranty: 2 Years

Patient Weight: Greater than 66 lbs

Cleaning Instructions

The chamber should be taken apart and hand washed weekly using warm water and a mild detergent. It should be rinsed well and allowed to air dry out of direct sunlight before reassembling. The chamber should not be washed in a dishwasher or washing machine. The SlimLine hose should be washed in the same manner and allowed to completely dry out of direct sunlight before reattaching to the machine and mask.

Required Settings: 1 Pressure Setting is Required

Unless directed otherwise, CPAP.com will leave this machine at its default settings of: