AirStart™ 10 CPAP with HumidAir™
The AirStart™ 10 CPAP is a basic, easy to use CPAP machine for those looking to add a second machine to a travel residence, or for those who prefer a machine with simplicity. The AirStart™ 10 includes comfort features such as built-in humidification and exhalation relief.
Demonstration Videos
SPECIFICATIONS
This Product Includes…
- CPAP Machine
- Built-In HumidAire Heated Humidifier
- Standard Humidifier Chamber
- SlimLine Tubing – 15mm Diameter
- Power Supply and Cord
- Travel Bag
- 1- Standard Filter (Installed)
- Filter Cover
- SD Card – Inserted in Machine
- Patient Manual
Product Specifications
Weight – Machine with Water Chamber: 2.75 lbs (44 oz.)
Dimensions – Machine with Water Chamber: 10.04 in L x 4.57 in W x 5.91 in H
Weight – Standard Chamber: .54 lb
Weight – Machine with Side Cover (Without Water Chamber): Approx. 2.452 lbs
Dimensions – Machine with Side Cover (Without Water Chamber): Approx. 8 in L x 4.57 in W x 5.91 in H
Dimensions – Travel Bag: 13.24 in L x 10 in W x 5 in H
Weight – Travel Bag Alone: 1.18 lb
Weight – Machine with Humidifier; Power Supply and Cord; SlimLine Tube; Travel Bag:Approximately 5.1 lbs
Weight – Machine with Humidifier; Power Supply and Cord; OPTIONAL ClimateLineAir Tube; Travel Bag: Approximately 5.25 lbs
Sound Level: 26.6 dBA
Water Chamber Capacity: 380 mL
Weight – 90W Power Supply, Cord and Plug: 1.29 lb
Dimensions – 90W Power Supply Only (Not including Cor or Plug): 5 1/2 in x 1 7/8 in x 1 1/4 in
AC Input Range – 90W Power Supply: 100 – 240V, 50 – 60Hz, 1.0 – 1.5A, Class II
DC Output – 90 W Power Supply: 24V — 3.75A
Typical Power Consumption: 53W (57VA)
Peak Power Consumption: 104W (108VA)
Operating Pressure: 4 – 20 cm H2O (0.2 cm increments)
Length – SlimLine Tubing: 6 feet
Materials – SlimLine Tubing: Flexible Plastic
Materials – Standard Water Chamber: Injection Molded Plastic, Aluminum , Silicone Seal
Materials – Dishwasher Safe Water Chamber: Injection Molded Plastic, Stainless Steel, Silicone Seal
Materials – Standard Filter: Polyester non-woven fiber
Temperature Range – Optional ClimateLineAir™ Heated Tube: 60 – 80° F (16 – 30° C)
Operating Temperature: 41° F – 95° F (5° C – 35° C)
Storage and Transport Temperature: -4° F – 140° F (-20° C – 60° C)
Operating Humidity: 10% – 95% Relative Humidity, non-condensing
Storage and Transport Humidity: 5% – 95% relative Humidity, non-condensing
Operating Altitude: Sea Level – 8500 Feet (2,591 M); Air pressure range 1013 hPa – 738 hPa
Maximum Temperature – Heating Plate: 154° F (68° C)
Maximum Temperature – Cut Out: 165° F (74° C)
Maximum Gas Temperature: Less than or Equal to 106° F (? 41° C)
IEC 60601-1:2005 Classification: Class II (Double Insulation), Type BF, Ingress protection IP22
Machine Warranty: 2 Years
Patient Weight: Greater than 66 lbs
Cleaning Instructions
The chamber should be taken apart and hand washed weekly using warm water and a mild detergent. It should be rinsed well and allowed to air dry out of direct sunlight before reassembling. The chamber should not be washed in a dishwasher or washing machine. The SlimLine hose should be washed in the same manner and allowed to completely dry out of direct sunlight before reattaching to the machine and mask.
Required Settings: 1 Pressure Setting is Required
Unless directed otherwise, CPAP.com will leave this machine at its default settings of:
- Ramp: Auto
- Start Pressure: 4 cm H2O
- Humidity Level: 4
- Mask Type: Pillows
- EPR: Off
- SmartStart: Off
- Tube Type: Slimline
- Antibacterial Filter: No
USER MANUAL
FREQUENTLY ASKED QUESTIONS
Helpful Hints
Product Features
The AirSense™ 10 CPAP Machine with HumidAir™ is a polished looking machine and built-in humidifier designed with user experience in mind. Easily understood menus, SmartStart™, and quiet operations are a few of the features that make this CPAP a great option. This is a single pressure CPAP machine that does not auto-adjust.
Features
- HumidAir™ Heated Humidifier
- OPTIONAL ClimateLineAir™ Heated Tube
- AutoRamp™
- SmartStart™
- Color LCD Display
- Integrated Light Sensor
- Expiratory Pressure Relief (EPR™)
- Therapy Data
HumidAir™ Heated Humidifier
The AirSense™ 10 CPAP Machine has a heating plate built in so the water chamber can be attached directly to the machine for a minimal footprint. The humidifier can be set to 9 different settings: off, and 1 through 8 with 1 being the lowest level of humidification, and 8 being the highest.
Take humidification to the next level by adding the OPTIONAL ClimateLineAir integrated heated tube to maintain the temperature of the entire air circuit. The Auto Climate Control mode will consider the room temperature and adjust the level of humidification delivered to the mask.
AutoRamp™
One of the most innovative features of the AirSense™ 10 line is AutoRamp™ technology. Algorithms allow the machine to sense when the user is awake or asleep, and once asleep will comfortably rise to the full prescribed pressure. See the Important Tips tab of this page for a more detailed explanation of the AutoRamp™ setting.
SmartStart™
For added convenience the AirSense™ 10 CPAP features SmartStart™ technology. Simply put on the mask and start breathing and the machine will begin therapy. Similarly, when the mask is taken off, the machine will register the user is no longer using the machine and turn off.
Color LCD Display with Integrated Light Sensor
The LCD display of the AirSense™ 10 CPAP features vibrant colors to help clearly identify different stages of therapy. A blank circle fills with green as therapy pressure ramps up. Green and red faces indicate proper or poor mask fit and are also used to indicate if the humidifier is working properly.
The machine also features a integrated light sensor which allows the screen to adjust brightness automatically when ambient light changes. If a restroom break is needed in the middle of the night, the screen won’t blind with brightness, and in the morning it won’t be too dim to read how therapy went. In addition, the screen will automatically turn off after a short time to avoid extra light in a dark room.
Expiratory Pressure Relief (EPR™)
Now a mainstay on ResMed machines, EPR™ is intended to make therapy more comfortable. Breathing out against full prescribed pressure can sometimes be uncomfortable. EPR™ steps in and helps by lowering the pressure by a set amount on exhalation.
Therapy Data
The AirSense™ 10 CPAP provides basic therapy data on the LCD Display such as Usage Hours, Events per Hour, Mask Seal, Period, Days Used, Days 4hrs+, Average Usage, Used Hours. The data provided is ONLY for clarification purposes, and is not a substitute for medical advice.